Find an ABYC Member Find a Certified Tech
BagSimple Store SignIn Log In
icon-magnifying-glass
ABYC For...
Recreational Boaters Educators Technicians Manufacturers Surveyors Dealers Boatyards
Find an ABYC Member Find a Certified Tech
BagSimple Store SignIn Log In
ABYC For...

Standards Pre-Test

header-layer-top
header-layer-bottom

Welcome to ABYC’s Standards Pre-Test! This quiz is intended to let you get a feel for the types and complexity of the questions on our professional level certification exams. While scoring well on this pretest is not a prerequisite for taking a class, your score should give an indication of whether you’re ready for the complete course. There are 15 questions in this quiz and we would recommend passing it with at least 12 correct answers before continuing on to the certification course.

Standards Pre-Test

Name
According to ABYC standards, a check valve is allowed to be installed in a bilge pump's discharge line to ___________.
Battery chargers shall meet all of the following requirements except:
Ungrounded battery cables without overcurrent protection-e.g. engine cranking circuit cables-shall be installed:
Conductors shall be supported throughout their length or at least every:
On engine exhaust systems, double hose clamps are required on exhaust hose installed:
According to ABYC standard A-24, a CO detector is required to be installed on any boat with:
An indicator of loss of exhaust cooling water is:
LPG supply lines for multiple appliance installations:
Which type of variable control can be used with navigation lights?
Which of the following is NOT required by T-5 for safety signs and labels?
The capacity information that should be displayed for a 19' monohull sterndrive boat shall include all the following EXCEPT:
On a gasoline powered vessel, when is an additional exhaust blower required?
If used, the wet exhaust system vented loop shall be located:
According to ABYC standard H-33, diesel fuel systems with multiple engines and/or multiple tanks:
ABYC requires that external ventilation openings be at least ______ from the fuel fill and tank vent fittings.

Become an ABYC Member

Tap into the essential source of technical information.

Discover Member Benefits